General 10-030 M1, Setup & Operation Manual

Page: 10 / 28

4
BASIC FUNCTIONS OF THIS MACHINE
This General International model 10-060 3/4 hp dust collector was designed to capture, remove and collect non-metallic
dust and wood dust around the workshop and from woodworking machinery. It is ideal for use with smaller woodworking
machines and shop tools such as: routers, table saws, small sanders, scroll saws, circular saws, portable power tools and
other such machinery that generates fine saw dust.
This unit is not designed to be effective with larger stationary woodworking machinery that generally produces higher
volumes of dust and/or larger, heavier wood chips such as jointers, surface planers, shapers, large drum or belt sanders,
or other such machinery.
This system is supplied with a series of pipes and connectors allowing the user to “custom fit” the ducting (within the limits
of the unit), to suit their specific shop situation.
An optional hook up kit (see optional accessories page 10 for more details) which includes 2-1/2” and 4” dia. dust hose
and hose clamps is available from your local General International dealer and allows the user to connect various tools
to the system at one or more of the connection points.
Note: As a general guideline, the maximum suggested distance from a dust source to the unit is 30 ft when using
2-1/2” hose. Maximum distances may drop considerably when using 4” hose. Since each shop situation is
different, your results may vary.
Note: Always turn on the dust collector before starting the dust producing machine. Always turn off the dust
producing machine before turning off the dust collector.
ASSEMBLY & INSTALLATION
TOOLSREQUIREDFORSET-UP/ASSEMBLY
1/2” open end wrench or adjustable wrench
Short Phillips Head Screwdriver
Portable Drill
1/4” Drill Bit
1/8” Drill Bit
Hammer
Tape Measure
Pencil
Note: The supplied wall anchors are for installation in standard drywall only. For installation in masonry, plaster or
other wall surfaces, use the appropriate wall anchors (not supplied) and a proper drill bit suitable to the material
being drilled.
STOP
WARNING ATTENTION
PUSH TO
STOP
PUSH TO
START
RPM
RPM RPM RPM RPM
RPM
DOWN DESCENDRE
UP MONTER FORWARD DIRECTIONLIGH
T LUMIÈRE DE MARCHEAVAN T
FORWARD MARCHE AVANT
REVERSE DIRECTION LIGHT LUMIÈRE DE MARCHEARRIÈ
RE
REVERSE MARCHE ARRIÈRE
POWER LIGHT LUMIÈRE DE MISE EN MARC HE
EMERGENCY STOP
ARRÊT D'URGENCE
BRAKINGTHE ADJUS
TMENT
CONTRÔLE DU TEM
PS DE FREINA GE
DANGE
R
STOP
START
RéGLEDESCURIT-SAFETYRULE
S VCZXZBXCZ
HXCVHJZXVCHVZSJXHVC
XVCBHJSVDCVWSDV
JHSC HDSDVCVHJ HSDVB
HBSDHJC VHSDHVCV
HSVDDVWS
HSDUKCVB SDV
HJSVCHJV VBNCMXBVJB
BVNMXCB ZVBZ
VCZXZBXCZ
HXCVHJZXVCHVZSJX
XVCBHJSVDCVWSDV
JHSC HDSDVCV
HBSDHJC VHSDHVCV
HSVDDVWS
HSDUKCVB SDV
HJSVCHJV
BVNMXCB ZVBZ
xkcjnvjknckxvnkzxnvcvb
cvjkb ncvbkoid mbp Çb vikmodfidfm ofmc mpmp
dk mfdn ozionpompmnmc kfn ifxcbv invob noncvknxcklvnzxlc
nvkl xz cv ckxvnljkxcbnkvnzxcvbnklzxcnbklc vnklbnclkvnblkzxcn xcvbjlxzbvlbzdfulbivubidufbf vuibicdcvbuidfbuivbuidbf
vuiui
Recommended
for:
Not recommended
for: