MOUNT THE UNIT
To leave the unit free to move on a horizontal
surface
, lift the foldaway stand on the back of the unit
by placing your fingertip in the recess on the bottom
edge of the unit.
To attach the unit to a wall or vertical surface
, obtain
a pair of Velcro strips and—without separating them—
trim them to a size of 1-3/4 in. by 3/8 in., or slightly
smaller than the recessed rectangular mounting area on
the top rear of the unit. Remove the paper backing from
nit:
ry compartment (marked
OPEN
) on the
e back of the unit by sliding its cover
irection of the arrow stenciled on it.
ack activation tab under the LR44
Discard the tab.
ery in the well so its rounded side faces
lat side (marked “LR44”) faces up. The
ot snap into place, so do not apply
ssure.
Summary of Contents for LCR318
Page 7: ......
