background image

UNPACKING

 

 

UNPACKING 

Inspect the shipping carton and its contents for shipping damage. If you 
detect shipping damage to any of the contents of the carton, notify your 
carrier. 

Remove flat beater and packing from bowl. 

If there are any parts missing, notify us immediately at 1-800-251-4232 or 615-893-
4820.

 

CAUTION

: The mixer should be installed on a level counter top 

strong enough to safely support its weight. 

CLEANING

 

 

Clean and sanitize the mixer, bowl and attachments before using the first time, 
immediately after each use, and before mixing different types of food products. 
Follow company, local, and state health/sanitation codes. 

NOTE

: If egg mixtures or flour batters are used, rinse with cold water first. Wash 

with hot, soapy water. 
Do NOT use caustic or abrasive cleaners.  

Do NOT spray cleaning materials or water toward the switch areas. 

 

DISASSEMBLY FOR CLEANING 

Unplug Mixer.  

Implement Removal 

1. Press the push button release catch. 

2. Place one hand under the front and raise the head until it locks in the 

open position. 

3. Remove implement by turning it counter-clockwise and pulling 

downward. 

 

Bowl Removal

 

1. Press down on the bowl rim and turn in a counter-clockwise 

direction. 

2. Lift and remove the bowl. 

WASH ALL SURFACES 

Clean implements, bowl and surfaces of the mixer with hot, soapy 
water and a clean cloth. 

 

 

 

 

04.02.96 

Summary of Contents for MM-5















Reviews: