background image

SAFETY 

 

RECOGNIZE SAFETY INFORMATION. When you see this symbol on 
your machine or in this manual, be alert to the potential for personal injury. 
Follow the recommended precautions and safe operating practices. 

UNDERSTAND SIGNAL WORDS

. DANGER, WARNING and CAUTION 

appear with the safety -alert symbol in this manual and on safety labels on 
the machine to identify the level of hazard seriousness. 

DANGER

 indicates a hazard that WILL result in severe personal injury or 

death. 

WARNING

 indicates a hazard or unsafe practice which COULD result in

 

severe

 personal injury or death. 

CAUTION

 indicates hazards or unsafe practices which COULD result in 

minor personal injury or equipment damage. 

 

READ ALL INSTRUCTIONS 

Read this operator's manual before using the machine. Failure to follow 
the instructions provided could result in personal injury or equipment 
damage. 

KEEP OUT OF REACH OF CHILDREN 

This mixer is intended for commercial use only. 

 

DO NOT PUT HANDS OR ANY IMPLEMENT IN THE BOWL  
WHILE THE MIXER IS OPERATING  

DO NOT OPERATE IF DAMAGED 

Do not operate this mixer with a damaged cord or plug, or if the mixer has 
been dropped or damaged in any manner. Contact the nearest factory-
authorized service center for examination, repair or adjustment. (Refer to 
the service center list included in the Owner's Information Packet.) 

Do not allow the cord to touch hot surfaces. 
Do not allow the cord to hang over the edge of a table or counter. 

DO NOT LEAVE MIXER UNATTENDED 

UNPLUG MIXER 

Set the switch to

 OFF

 and unplug the mixer from the outlet when not in 

use or when clearing a jammed attachment. 

KEEP MACHINE AWAY FROM WATER 

Do not let machine base stand in water 

Do not immerse the mixer in water or any other liquid. 

ATTACHMENTS 

Do not use attachments not recommended by the manufacturer. 

 

Follow the manufacturer's instructions for use of attachments  

SAVE THESE INSTRUCTIONS. 

Keep this booklet in a convenient location for future reference. 

 

 

 

 

 

 

 

 

 

04 02 96

 

Summary of Contents for MM-5















Reviews: