Model 4802A
i
Warranty Statement
General Monitors warrants the Model 4802A to be free from defects in workmanship or
material under normal use and service within two (2) years from the date of shipment.
General Monitors will repair or replace without charge any such equipment found to be
defective during the warranty period. Full determination of the nature of, and
responsibility for, defective or damaged equipment will be made by General Monitors’
personnel. Defective or damaged equipment must be shipped prepaid to General
Monitors’ plant or the representative from which shipment was made. In all cases, this
warranty is limited to the cost of the equipment supplied by General Monitors. The
customer will assume all liability for the misuse of this equipment by its employees or
other personnel. All warranties are contingent upon proper use in the application for
which the product was intended and do not cover products which have been modified
or repaired without General Monitors’ approval or which have been subjected to
neglect, accident, improper installation or application, or on which the original
identification marks have been removed or altered. Except for the express warranty
stated above, General Monitors disclaims all warranties with regard to the products
sold, including all implied warranties of merchantability and fitness and the express
warranties stated herein are in lieu of all obligations or liabilities on the part of General
Monitors for damages including, but not limited to, consequential damages arising out
of/or in connection with the use or performance of the product.
Warnings
WARNING
-
COMBUSTIBLE & FLAMMABLE GASES AND VAPORS ARE VERY
DANGEROUS. EXTREME CAUTION SHOULD BE USED WHEN COMBUSTIBLE &
FLAMMABLE GASES AND VAPORS ARE PRESENT.
All Zero Two Series Modules contain components, which can be damaged by static
electricity. Special care must be taken when wiring the system to ensure that only the
connection points are touched.
Only Catalytic Bead sensors designed by General Monitors will work with the Model
4802A. Any attempt to use a sensor that has not been designed by General Monitors
will void the warranty.
WARNING
-
Installation and Maintenance must be carried out by suitably skilled and
competent personnel only.
Full backward compatibility can be specified at the time of order. If this configuration is
specified, the rear terminal output designations will be identical to the previous
generation of Zero Two Series Modules.
This generation of product can be distinguished from the previous generation by the
lack of a door on the front panel. Adjustments are not necessary on the current
generation of this product.
