12
ENG
L
ISH
7.
Secure your remaining miter saw mounting
point(s) to the adaptor plate with an
appropriate bolt assembly comprising a bolt
of proper length, flat washer, lock washer,
and lock nut.
NOTE:
The bolt assembly for this step must
be supplied by the end user.
SET-UP / KNOCK
DOwN PROCEDURES
●
it is much easier to fold up the stand with
the miter saw not attached.
1.
Release the easy-clamp saw mount
brackets and place the miter saw off to the
side before proceeding.
2.
Slide in the the work support extension
rails.
3.
Press the button (K, fig.10) to swing the leg
freely.
4.
Repeat for the other leg and lower the stand
to rest on its wheels.
5.
Hold up the other end of the stand while
swinging its legs into the folded position.
The stand can now be rolled away or
stored.
6.
For set-up, reverse the above steps.
