BASIC ADJUSTMENTS AND CONTROLS
Once the assembly steps have been completed, uncoil
the power cord and plug into an appropriate outlet.
Refer back to the section entitled “Electrical Require-
ments” and make sure all requirements and ground-
ing instructions are followed. When sanding operations
have been completed turn off and unplug the sander
from the power source.
CONNECTING TO A POWER SOURCE
TO REDUCE THE RISK OF SHOCK OR FIRE DO NOT
OPERATE THE UNIT WITH A DAMAGED POWER CORD
OR PLUG. REPLACE DAMAGED CORD OR PLUG IMME-
DIATELY.
SWITCH OFF
TO AVOID UNEXPECTED OR UNINTENTIONAL
START-UP, MAKE SURE THAT THE POWER SWITCH
IS IN THE OFF POSITION BEFORE CONNECTING
TO A POWER SOURCE.
TILTING THE SANDING BELT/DISC TABLES
To tilt the sanding belt table:
1. Loosen table locking lever
A
.
2. Tilt the table to the desired angle
B
and then tighten
the lever clockwise to secure the table in position.
BEFORE MAKING ANY ADJUSTMENTS, MAKE SURE THAT THE SWITCH IS IN THE “OFF” POSITION AND THAT THE POWER
CORD IS UNPLUGGED.
To tilt the sanding disc table:
1. Loosen table locking levers
C
.
2. Tilt the table to the desired angle
D
. Tighten the
levers to secure the table in position.
11
POWER ON
SAFETY KEY
POWER OFF
1
2
3
(PREVENTS START-UP
WHEN REMOVED)
TO PREVENT UNWANTED OR UNAUTHORIZED START-UP
OR USAGE, REMOVE THE LOCK-OUT KEY AND STORE IT
IN A SAFE PLACE, OUT OF THE REACH OF CHILDREN,
WHENEVER THE SANDER IS NOT IN USE.
ON/OFF POWER SWITCH WITH SAFETY KEY
This model 15-142 sander is equipped with an ON/OFF
power switch with a removable lock out safety key:
- To start the machine, insert the safety key,
1
, and lift
the switch up,
2
.
- To stop the machine, push the switch down,
3
.
A
B
LOOSEN
TIGHTEN
Table can tilt
10° inward to
45° outward
LEVER ON THE LEFT OF THE TABLE
LEVER ON THE RIGHT OF THE TABLE
C
C
D
LOOSEN
TIGHTEN
LOOSEN
TIGHTEN
Summary of Contents for 15-142 M1
Page 19: ...RETSD Associated Assets...
