General International 10-950, Setup & Operation Manual

Page: 8 / 18

LIST OF CONTENTS QTY
A.
DUST COLLECTOR .................................................................... 1
B.
HEX. FLANGE BOLT ................................................................. 16
C.
5 MM ALLEN KEY ..................................................................... 1
D.
12 & 10 MM COMBINATION WRENCH ................................... 1
E.
HEX. BUTTON SOCKET CAP SCREW ......................................... 4
F.
LOCKABLE SWIVEL CASTER ..................................................... 2
G.
SWIVEL CASTER ........................................................................ 2
H.
PHILLIPS HEAD SCREW ............................................................. 1
I.
6” TO 2 X 4” Y-INLET ................................................................. 1
J.
INLET MOUNT ........................................................................... 1
8
UNPACKING
This model 10-950 1 1/2 HP Metal Dust collector is designed to efficiently collect and filter metallic dust for metal-
working shop activities such as grinding, sanding and polishing.
The 3-stage filtration system includes a stainless steel inner filter that can capture larger debris and metal dust, an
intermediate active charcoal filter to capture finer particles as small as 5 microns, and a pleated outer filter de-
signed to capture particles as small as 1 micron.
NOTE: THIS UNIT IS NOT DESIGNED TO REPLACE PERSONAL BREATHING PROTECTION DEVICES SUCH AS RESPI-
RATORS OR DUST MASKS. TO ENSURE YOUR PERSONAL PROTECTION YOU MUST CONTINUE TO USE PERSONAL
BREATHING PROTECTION DEVICES WHENEVER RECOMMENDED FOR THE OPERATION OR WORK BEING PER-
FORMED.
To ensure efficiency and maximize service life, make sure to check and clean the filters regularly and replace
them as needed. To avoid potentially costly down time, consider keeping a spare set of replacement filters on
hand and nearby for use when needed.
Order spare replacement filters as soon as you take your spare “back-up” filter out of storage and put it into use.
Replacement filters can be ordered through your local General International dealer/distributor. For a complete list
of distributors consult the listing on the General International website at: www.general.ca
Carefully unpack and remove the unit and its components from its shipping container and check for missing or
damaged items as per the list of contents below.
NOTE: PLEASE REPORT ANY DAMAGED OR MISSING ITEMS TO YOUR GENERAL® INTERNATIONAL DISTRIBUTOR IMMEDIATELY.
BASIC FUNCTIONS
B
C
D
E
F
J
H
A
I
G
A
B
ADDITIONAL REQUIREMENTS FOR SET UP
A.
EXTRA PERSON FOR HELP WITH LIFTING
B.
PHILLIPS SCREWDRIVER