ASSEMBLY
STEP 7
Setup the rest of the Growing Chambers
and install the Spraylines by following the
directions provided with the Spraylines.
STEP 8
The level of the water in the Growing
Chamber is controlled by the height of
the DLT. Keep the DLT access covered with
the DLT Cover.
STEP 9
Attach each of the Spraylines to
the Manifold and then the Flexible
Pumpline to the Manifold. Make
sure there is a rubber gasket in the
Sprayline fitting and DO NOT OVER
TIGHTEN. Cover the inspection hole
with the Hatch Cover
