2.4M SERIES 1241 ANTENNA
4096-859
ASSEMBLY MANUAL
REVISION A
Prodelin Corporation
Page 18
8/17/2012
Figure 9: Quad #2 Installation
2
33, 34, 35
25
STEP 5
Note: Installing the lower quads (#2, #3) first will ease installation.
(A) Place Quad #2 on the cross arm (item 13) with the seam ribs between the reflector brackets
(items 7, 8, 11). Note that the longer side should be aligned with the major axis. Note the
location of the feed support mounting hole at the bottom of the reflector in Figure 9.
(B) Insert a 5/16 bolt (item 25) thru the seam rib and the center bracket (item 11) to temporarily
hold the petal.
(C) Insert the ½” bolt and washers (item 33, 34, 35) thru the cross arm and into the reflector
spacer. Hand snug only at this time.
DETAIL VIEW
8
7
2
DETAIL VIEW
11
11
2
Shown with 1240
series positioner for
illustration only
Note location of
feed support
mounting hole
