2.4M SERIES 1241 ANTENNA
4096-859
ASSEMBLY MANUAL
REVISION A
Prodelin Corporation
Page 16
8/17/2012
Figure 7: Reflector Support Brackets
STEP 3
(A) Place the cross arms (item 13) on the reflector support (item 12) as shown. Place the RH
and LH top brackets (items 9, 10) on the top cross arm and secure with 3/8 hardware (items 29,
30, 31, 32) as shown. Snug hardware by hand only at this time.
(B) Place the RH and LH bottom brackets (items 7, 8) on the bottom cross arm and secure with
3/8 hardware (items 29, 30, 31, 32) as shown. Snug hardware by hand only at this time.
(C) Place the two center brackets (item 11) on the reflector support as shown and secure with 3/8
hardware (items 29, 30, 31, 32) as shown. Snug hardware by hand only at this time.
Note: If installing with an inverted reflector, the locations of brackets (items #7,8 and
items #11,13) will be reversed from location shown.
13
29, 30
30, 31, 32
13
7
8
9
11
11
11
12
Shown with 1240
series positioner for
illustration only
