2.4M SERIES 1241 ANTENNA
4096-859
ASSEMBLY MANUAL
REVISION A
Prodelin Corporation
Page 17
8/17/2012
Figure 8: Reflector BTM Support Brackets
STEP 4
Note:
Make sure the BTM brackets (items 7, 8), and the cross arm (item 13),
are fully seated against the reflector support with no gaps between any of the
components before completing the next procedure.
Insert 3/8” hardware (items 29, 30) thru the reflector support (item 12) and the BTM
brackets (item 7, 8) as shown. Secure with 3/8” washers and hex nuts (items 30, 31,
32). Tighten this hardware to recommended torque to secure the BTM brackets.
(See table 1).
12
8
30, 31, 32
29, 30
30, 31, 32
29, 30
7
See Note
