General Dynamics
4096-387
SATCOM Technologies
1.2M Ku-BAND Rx/Tx SERIES 1123
12
SECTION III
FEED SUPPORT ASSEMBLY
These Instructions are intended as a general reference for feed support assembly. If
your antenna system has specific feed support instructions, refer to them at this time.
CAUTION:
During the assembly procedure, the sequence of instructions must be
followed.
Do not tighten any hardware until instructed.
Refer to the part list and referenced steps below.
FEED SUPPORT PART LIST- TABLE 3.0
ITEM
PART NO.
DESCRIPTION QTY
1
0176-213
Feed Rod
2
2
VARIES
Feed Support
1
3
8319-004
8319-006
8308-019
3
2
4
4
8031-026
1
5
8201-041
2
6
8202-041
1
7
8101-009
1
5/16” Hex Nut
11/32-14 x 7/8 Hi-Lo Screw
27/64-13 x 1-3/8 Hi-Lo Screw
M8 x 15 MM Screw
5/16” x 3.25 Bolt
5/16” Flatwasher
5/16” Lockwasher
