General Dynamics Itronix | 72-0145-001
GD3080 User Guide
Notices and Safety
Dynamics Itronix equipment as this might void any main-
tenance contract with your company. Unauthorized service
personnel might be subject to shock hazard on some General
Dynamics Itronix equipment if removal of protective covers is
attempted.
The product you have purchased is powered by a rechargeable
battery. The battery is recyclable and, under various state and
local laws, it may be illegal to dispose of this battery into the
municipal waste stream. Do not crush the battery or place it in
a fire. Check with your local solid-waste officials for details on
recycling options or proper disposal.
Caution
Internal components of the GD3080 computer will
be damaged if exposed to contaminants. When dust covers, or
the bottom access panel are open on the computer, shield the
unit from all contaminants such as liquids, rain, snow, and dust.
Internal radio(s) may have an individual FCC Identifier which
are not applicable to this configuration. Only the FCC ID shown
on the label located on the bottom of the computer is appli-
cable. The computer must not be co-located or operating in
conjunction with any other antenna or transmitter than speci-
fied in the filing.
This device may contain a WLAN radio transmitter, and a PAN
radio transmitter. When using the WLAN transmitter, a mini-
mum separation distance must be maintained between the
upper right and left edges of the display screen and all users/
bystanders. The WLAN/PAN transmitter should be turned off
before carrying the computer to comply with FCC RF exposure
requirements.
In the event of problems, you should contact your equipment
supplier in the first instance.
This product is intended to be supplied by a Listed Power Unit
and output rated 12V DC input voltage, 4.16A.
Caution
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a type
andmaximum (or lesser) gain approved for the transmitter
by Industry Canada. To reduce potential radio interference to
other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
Sous la réglementation d’Industrie Canada, ce transmetteur radio ne
peut fonctionner en utilisant une antenne d’un type et un maximum
(ou moins) gain approuvées pour l’émetteur par Industrie Canada.
Pour réduire le risque d’interférence aux autres utilisateurs, le type
’antenne et son gain doivent être choisis de manière que la puis-
sance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui
est nécessaire pour une communication réussie.
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two con-
ditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.
C
et appareil est conforme avec Industrie Canada exempts de
licence standard RSS (s). Le fonctionnement est soumis aux
deux conditions suivantes: (1) cet appareil ne peut pas provoquer
d’interférences et (2) cet appareil doit accepter toute interférence, y
compris les interférences qui peuvent causer un mauvais fonc-
tionnement de l’appareil.
Compliance Statement for Canada
CAUTION: Industry Canada - Class B
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
interference-causing equipment standard entitled “Digital
Apparatus,” ICES-003 of Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélec-
triques applicables aux appareils numériques de Classe B prescrites
dans la norme sur le matérial brouilleur: “Appareils Numériques,”
NMB-003 édictée par l’Industrie. (1) this device may not cause
interference,and (2) this device must accept any interference,
including interference that may cause undesired operation of the
device.”
Under Industry Canada regulations, this radio transmitter may
only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equiva-
lent isotropically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Sous la réglementation d’Industrie Canada, ce transmetteur radio ne
peut fonctionner en utilisant une antenne d’un type et un maximum
(ou moins) gain approuvées pour l’émetteur par Industrie Canada.
Pour réduire le risque d’interférence aux autres utilisateurs, le type
d’antenne et son gain doivent être choisis de manière que la puis-
sance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui
est nécessaire pour une communication réussie.
This device complies with Industry Canada license-exempt
RSS standard(s). This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interfer-ence that may cause undesired operation of
the device.
Cet appareil est conforme avec Industrie Canada exempts de
licence standard RSS (s). Le fonctionnement est soumis aux
deux conditions suivantes: (1) cet appareil ne peut pas pro-voquer
d’interférences et (2) cet appareil doit accepter toute interférence,
y compris les interférences qui peuvent causer un mauvais
fonctionnement de l’appareil.
RF exposure warning: The equipment complies with RF
exposure limits set forth for an uncontrolled environment. The
antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or
transmitter.
