Application Guidelines
General Application Information
A-2
SpectraComm ADT
076R172-000
Installation and Operation Manual
Issue 6
SC-ADT Default Configurations
SC-ADT is shipped from the factory with the ordered Default Profile that suits most customer
applications.
lists all configuration parameters, with the Default Configuration Profile #1
settings shown
bold
. Your factory defaults may vary, depending on which profile was ordered
with your unit.
Users can change values from the default setting via Supv or Admin access to the CLI or the web
interface. The Default Profile can be reloaded back into a SC-ADT whenever a “clean baseline” is
desirable prior to downloading a batch file configuration. To accomplish this, type
default all
at the command prompt, or add the
# default all
command uncommented at the start of
your configuration batch file. You may need to reboot the unit.
Table A-1
Configuration Parameters and Defaults
Configurable Option
Description
Parameters and Defaults
System Prompt
Custom prompt
A quoted string; 20 chars max
ADT-8
,
ADT-16
or
ADT-32
CLI Inactivity Timer
Times out console CLI or Telnet
CLI.
120 to 10,000 sec (0 to disable)
900
Port Inactivity Timer
Times out terminal port use.
120 to 10,000 sec (0 to disable)
900
DUN Inactivity Timer
Times out modem PPP link.
120 to 10,000 sec (
0
to disable)
Dialin Port Mode
Primary and Backup IP server addr (No default)
Primary IP mask (a.b.c.d);
255.255.255.255
HTTP Service
HTTP server support for web
management
Enable or
Disable
SNMP Service
SNMP server support for SNMP
management
Enable or
Disable
Telnet Service
Telnet server support for telnet
management
Enable
or Disable
SSH Service
Secure Tunnel server support for
encrypted management
Enable or
Disable
FTP Service
FTP server support for firmware
(Flash) download
Enable or
Disable
TFTP Service
TFTP server support for firmware
(Flash) download
Enable or
Disable
Ethernet Interface
Sets admin state on to allow xmit &
recv.
Enable or
Disable
Ethernet ip-address
IP address (a.b.c.d)
IP mask (a.b.c.d);
(No default)
IP broadcast address (a.b.c.d)
(optional)
255.255.255.255
Interfaces description
A description of the interface
A quoted string; 72 chars max (No default)
Modem interface
Sets admin state ON (allow xmit
and receive)
Enable
or Disable
Modem0 ip-address
IP address (a.b.c.d)
192.168.11.20
IP mask (a.b.c.d)
255.255.255.128
IP broadcast address (a.b.c.d)
(optional)
255.255.255.255
