SC-ADT Configuration
Port Configuration
3-22
SpectraComm ADT
076R172-000
Installation and Operation Manual
Issue 6
10. Configure routes for the bypass modem interfaces (2100 to 65535) by typing:
configure modem bypass udp-port
[5361]
modem
[0 or 1]
configure modem bypass gateway
[IP address]
modem
[0 or 1
configure ip-route default route
[e0, m0, or m1] [default IP address]
Note
You will not be able to configure modem0 or modem1 for bypass modem mode if the associated port (Port1
or Port2, respectively) is in Transport mode or is in Terminal Server Mode and in use.
11. You have completed Bypass Modem Mode configuration for the SC-ADT. Check your
configured options for each modem by typing any of the following commands:
show interfaces
show configuration
show modem use
[n]
Figure 3-7
Typical Bypass Modem Displays
ADT-16% show interfaces
_________________________Interface Status Summary______________________________
(For details, use command "show interfaces <Interface Name>")
Interface Admin Line
Name IP Address/Prefix State Protocol Attributes
----------- ------------------ ----- -------- ------------
ethernet0 172.016.005.128/16 ON UP ARP
modem0 192.168.011.020/24 ON DOWN Disconnected
modem1 192.168.011.020/24 ON DOWN Disconnected
Interface Descriptions
------------------------------------------------------------------------------
-
e0
m0 Customer-supplied IP device
m1
ADT-16% show configuration
#
# modem0 interface
configure interfaces ip-address modem0 192.168.11.20 255.255.255.0
configure interfaces description modem0 "Customer-supplied IP device"
configure interfaces enable modem0
#
ADT-16% show modem use modem0
modem1 is configured as bypass
