Page 17 of 19
Switching to Thermostatic Mode
To switch the heater to
thermostatic mode, turn the
heater on manually, as
discussed in previous section.
1. Once the heater is on, press
and hold the OK button for
three seconds and then release
it.
2. The display will change to a
temperature setting, which can
be adjusted from 05
o
C to 35
o
C
using the arrow keys.
3. To adjust back to the variable
output mode, press and hold
the OK button again for 3
seconds and then release it.
4. To switch the heater off, press the power button to
return to the home screen.
Fan Mode
The fan mode works in the same way as the manual
on/off mode. Simply navigate across to the fan
symbol and confirm with OK. The fan will then
automatically switch on and its speed can be
adjusted from high to low (07 to 01 respectively)
using the arrow keys. To switch it off, press the
power button.
Programming Heater Start Times
The digital timer can be programmed for three
individual start times per day on any combination of
seven days.
1. Navigate to ‘P’ symbol and
press OK
2. Using the arrow keys, select
the number ‘1’ (flashing) and the
top of the screen and press OK –
number ‘1’ is the first preset
heater start time.
3. Using the arrow keys, select
‘ON’, as this will allow the heater
to switch on after the presetting
is complete.
4. Select the length of time you
want the heater to run by using
the arrow keys. L800 represents
800 minutes. Run time can be set
to 50 to 990. Press OK to
confirm.
5. Select the hour you wish the
heater to start using the arrow
keys and then pressing OK to
confirm.
6. Select minutes in same
manner and press OK to confirm.
7. Select the days of the week
you want your start time ‘1’ to
initiate. Use arrow keys to scroll
down the week days and OK key
to select ‘ON’.
8. Preset start time ‘1’ is now set,
as indicated by underlining
number ‘1’ on the display.
9. Set start times ‘2’ and ‘3’
following steps 2 – 7 above.
NOTE
To turn any of the preset times off without
altering set times, repeat step ‘3’ above and
select ‘OFF’ using arrow keys. Then
repeatedly press OK until you return to home
screen.
Summary of Contents for BISON 2200A
Page 1: ...BISON 2200A OWNER S MANUAL...
