![Generac Power Systems MGG155 Operating Manual Download Page 43](http://html.mh-extra.com/html/generac-power-systems/mgg155/mgg155_operating-manual_2209224043.webp)
Maintenance
38
MGG155/210 Operating Manual
35319 C
2.
Connect both batteries with a jumper cable, attaching the black booted end of the cable to the negative
(NEG or -) post of the first battery (farthest from disconnect switch), and the red booted end to the positive
(POS or +) post of the second battery.
Figure 17 - Battery Connections
3.
Attach the black cable from the engine ground to the negative (NEG or -) post of the second battery.
CAUTION
Do not make battery connections in reverse. Doing so will result in equipment damage.
(000167)
Final Instructions
1. Install the five amp controller fuse in the control panel.
2.
Turn the battery disconnect switch to ON.
3.
See
Other Maintenance Checks
The following inspections should be performed by a Independent Authorized Service Dealer, or a properly trained
authorized operator. These maintenance items require a high level of experience and skill to evaluate and correct.
•
Inspect engine accessory drive belts.
•
Inspect hoses and connections.
•
Inspect fuel supply system.
•
Inspect exhaust system.
•
Inspect exhaust pipe sleeve.
Note:
All recommended service maintenance or repairs should be completed by an Independent Authorized Service
Dealer to maintain the warranty status of a unit.
02035
Discount-Equipment.com