Generac Power Systems Magnum MGG100M, Operator'S Manual

Page: 50 / 84

Operation
42 MGG100M Operating Manual 36833 C
WARNING
Risk of burn. Do not open or mutilate batteries. Batteries contain electrolyte solution,
which can cause burns and blindness. If electrolyte contacts skin or eyes, flush with
water and seek immediate medical attention. (000163a)
A battery presents an electrical shock hazard and high short circuit current, as well as being caustic and corrosive.
When working on batteries, observe the following precautions.
• Remove watches, rings, necklaces, and all other metal objects.
• Use tools with insulated handles.
• Wear rubber gloves and boots.
• Wear full eye protection (safety glasses or goggles) and protective clothing.
• Where electrolyte contacts the skin, flush the area immediately with water and wash it off using soap and water.
• Where electrolyte contacts the eyes, immediately flush the eye thoroughly with water and seek medical attention
quickly.
• Spilled electrolyte is to be washed down with an acid neutralizing agent. A common practice is to use a solution
of 1 lb (454 grams) bicarbonate of soda (baking soda) to 1 gal (3.8L) of water. The bicarbonate solution is to be
added until evidence of reaction (foaming) has ceased. The resulting liquid is to be flushed with water and the
area dried.
WARNING
A battery presents a risk of fire because they generate hydrogen gas. Hydrogen gas
is extremely explosive. Never jump start a battery, smoke in the area around the
battery or cause any spark to occur in the area around the battery.
• Do not smoke when near batteries.
• Do not cause flame or spark in battery area.
• Discharge static electricity from body before touching batteries by first touching a grounded metal surface.
WARNING
Disconnect the battery's ground terminal before working in the vicinity of the battery
or battery wires. Contact with the battery can result in electrical shock when a tool
accidentally touches the positive battery terminal or wire. The risk of such shock is
reduced when the ground lead is removed during installation and maintenance.
Battery Disconnect Switch
The unit is equipped with a battery disconnect switch ( Figure 6 ), which allows the operator to disconnect power from
the battery by turning the switch to OFF.