Generac Power Systems G007144, Installation Manuallines

Page: 9 / 68

Safety Information
Installation Guidelines For 50 Hz Air-Cooled Generator Sets 3
G Activation •
Activate the generator set before putting the unit into
operation.
•
Read the manual for details.
H No User Serviceable
Parts •
Electricity is present at various locations inside this
enclosure.
•
This equipment is designed for automatic operation
and may start at any time. Render the unit inoperable
before servicing.
•
Battery is present. Wear appropriate protective gear.
•
This equipment emits exhaust gases. Ensure proper
installation to prevent asphyxiation.
•
Do not open the enclosure. There are no user-
serviceable parts inside. Contact an IASD.
•
Read and understand the manual completely before
installing or operating this equipment.
•
Do not smoke near this equipment.
•
Do not allow open flames near this equipment.
J Read Owner’s Manual Read the manuals for an explanation of this device.
K Lifting Point Install lifting attachments to this location and only
locations identified as such. Do not connect lifting device
directly to the lift point.
L Pinch Point Keep hands clear of these areas when installing the front
panel or closing the roof.
M1 — Model Data Decal Decal Location—8 kVA units
M2 — Model Data Decal Decal Location—10 kVA and 13 kVA units
N — Fuel Data Decal Decal Location
P Sound Power Level Guaranteed sound power level per Directive 2000/14/
EC. See Specifications in the owner’s manual for actual
value.
Q Threaded Connection Fuel inlet has a 1/2 in. NPT threaded connection.
WWW.ACTIVATEGEN.COM
1 2
in.
NPT