Safety Information
2
Installation Guidelines For 50 Hz Air-Cooled Generator Sets
Safety and Informational Decals
This unit is equipped with safety and informational decals displaying pictorial symbols. These symbols and decals are
described below. Locations are identified in
. Contact an IASD for a replacement if a decal is missing,
damaged, or illegible.
ID
Decal
Description
Meaning
A
Oil Drain
Oil drain location
B
Positive Battery Cable
•
Electricity is present. Keep positive terminal covered
at all times when connected to battery.
•
Read and understand manuals completely before
using this equipment.
•
Identifies positive battery cable.
C
Negative Battery Cable
Identifies negative battery cable
D
Fuel Selection
Step 1: Unit set for Natural Gas (NG) operation.
Step 2: Press and rotate fuel selector 180° to change fuel
type.
Step 3: Unit set for Liquid Propane (LPG) operation.
NOTE:
This decal is intended to be discarded after
installation and need not be replaced if missing.
E
Shock Hazard / Read
The Manual
•
Live components carrying potentially lethal voltages
may be accessible inside. Render the equipment
safe before attempting further access.
•
Read and understand manuals completely before
attempting further access.
F
Burn Hazard /
Asphyxiation Hazard
•
Surface may be hot. Do not touch when operating
equipment. After equipment shutdown, allow
sufficient time for surfaces to cool prior to contact.
•
Carbon monoxide, a colorless odorless poisonous
gas, is emitted in engine exhaust while equipment is
running. Avoid inhalation of exhaust gases.
NG
LP
NG
LPG
1
2
3
