Generac 1800PSI High Pressure Washer
GENER
A
C
11
H i g h P r e s s u r e W a s h e r
Pressure Washer Rinsing
WARNING: Be extremely careful if you
must use the pressure washer from a
ladder, scaffolding or any other relatively
unstable location. Pressure in a running
washer builds as you climb. When you
press the trigger, the recoil from the initial
spray could force you to fall. The high pres-
sure spray could also force you to fall if you
are too close to the cleaning surface.
For Rinsing
:
Slide the nozzle forward to high pressure and wait
for the detergent to clear.
Keep the spray gun a safe distance from the area
you plan to spray.
Apply a high pressure spray to an small area and
then check the surface for damage. If no damage
is found, you can assume it is okay to continue
cleaning.
Start at the top of the area to be rinsed, working
down with same overlapping strokes as you used
for cleaning.
Note
: You can also stop detergent from flowing by
simply removing detergent siphoning tube from bottle.
Automatic Cool Down System
(Thermal Relief)
If you run the engine on your pressure washer for 3-5
minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach a tempera-
ture between 140145°F. When the water reaches
this temperature, the automatic cool down system
engages and cools the pump by
discharging the
warm water onto the ground.
This system prevents
internal damage to the pump.
