background image

Section 9 – Warranty

Standby Generator Sets

Part No. 0F0648

Revision G (10/12/05)

Printed in U.S.A.

GENERAC POWER SYSTEMS STANDARD TWO-YEAR LIMITED WARRANTY

FOR STANDBY POWER SYSTEMS

NOTE: ALL UNITS MUST HAVE A START-UP INSPECTION PERFORMED BY AN AUTHORIZED GENERAC DEALER.

For a period of two (2) years or two thousand (2,000) hours of operation from the date of sale, which ever occurs first, Generac Power Systems, Inc. 
will, at its option, repair or replace any part(s) which, upon examination, inspection, and testing by Generac Power Systems or an Authorized/Certified 
Generac Power Systems Dealer, or branch thereof, is found to be defective under normal use and service, in accordance with the warranty schedule 
set forth below. Any equipment that the purchaser/owner claims to be defective must be examined by the nearest Authorized/Certified Generac Power 
Systems Dealer, or branch thereof. This warranty applies only to Generac Power Systems Generators used in "Standby" applications, as Generac 
Power Systems, Inc. has defined Standby, provided said generator has been initially installed and/or inspected on-site by an Authorized/Certified 
Generac Power Systems Dealer, or branch thereof. Scheduled maintenance, as outlined by the generator owner's manual, must be performed by an 
Authorized/Certified Generac Power Systems Dealer, or branch thereof. This will verify service has been performed on the unit throughout the warranty 
period. This warranty is limited to and available only on Liquid-cooled units.

WARRANTY SCHEDULE

YEAR ONE — One hundred percent (100%) coverage on mileage, labor, and parts listed.
• ALL COMPONENTS — ENGINE, ALTERNATOR, AND TRANSFER SWITCH
YEAR TWO — One hundred percent (100%) coverage on parts listed.
• ALL COMPONENTS — ENGINE, ALTERNATOR, AND TRANSFER SWITCH PARTS ONLY

Gearbox Equipped Units - Limited Gearbox Coverage

YEARS ONE THROUGH FIVE — Parts and labor coverage on gearbox and components.
YEARS SIX THROUGH TEN — Parts only coverage on gearbox and components.

Guidelines:

Travel allowance is limited to 300 miles maximum, and 7.5 hours maximum (per occurrence), round trip, to the nearest authorized Generac Service 
Facility, and only applies to permanently wired and mounted units.
•  Any and all warranty repairs and/or concerns, must be performed and/or addressed by an Authorized/Certified Generac Power Systems Dealer, or 

branch thereof.

•  A Generac Power Systems, Inc. Transfer Switch is highly recommended to be used in conjunction with the generator set. If a Non-Generac Power 

Systems, Inc. Transfer Switch is substituted for use and directly causes damage to the generator set, no warranty coverage shall apply.

•  All warranty expense allowances are subject to the conditions defined in Generac Power Systems Warranty, Policies, Procedures and Flat Rate 

Manual.

• Units that have been resold are not covered under the Generac Power Systems Warranty, as this Warranty is not transferable.
• Unit enclosure is only covered during the first year of the warranty provision.
• Use of Non-Generac replacement part(s) will void the warranty in its entirety.
•  Engine coolant heaters (block-heaters), heater controls and circulating pumps are only covered during the first year of the warranty provision.

THIS WARRANTY SHALL NOT APPLY TO THE FOLLOWING:

  1.  Any unit built/manufactured prior to July 1, 2004.
  2.  Costs of normal maintenance (i.e. tune-ups, associated part(s), adjustments, loose/leaking clamps, installation and start-up).
  3.  Any failure caused by contaminated fuels, oils, coolants/antifreeze or lack of proper fuels, oils or coolants/antifreeze.
 4.  

Units sold, rated or used for "Prime Power", "Trailer Mounted" or "Rental Unit" applications as Generac Power Systems has defined Prime Power, 
Trailer Mounted or Rental Unit. Contact a Generac Power Systems Distributor for Prime Power, Trailer Mounted or Rental Unit definition and 
warranty.

 5.  

Failures caused by any external cause or act of God such as, but not limited to, collision, fire, theft, freezing, vandalism, riot or wars, lightning, 
earthquake, windstorm, hail, volcanic eruption, water or flood, tornado, hurricane, terrorist acts or nuclear holocaust.

  6.  Products that are modified or altered in a manner not authorized by Generac Power Systems in writing.
  7.  Failures due, but not limited to, normal wear and tear, accident, misuse, abuse, negligence, or improper installation or sizing.
 8.  

Any incidental, consequential or indirect damages caused by defects in materials or workmanship, or any delay in repair or replacement of the 
defective part(s).

  9.  Damage related to rodent and/or insect infestation.
 10.  Failure due to misapplication, misrepresentation, or bi-fuel conversion.
 11.  Telephone, facsimile, cellular phone, satellite, Internet, or any other communication expenses.
 12.  Rental equipment used while warranty repairs are being performed (i.e. rental generators, cranes, etc.).
 13.  Overtime, holiday, or emergency labor.
 14.  Modes of transportation deemed abnormal (refer to Generac Power Systems Warranty, Policies, Procedures and Flat Rate Manual).
 15.   Steel enclosures that are rusting due to improper installation, location in a harsh or saltwater environment or scratched where integrity of paint 

applied is compromised.

 16.   Any and all expenses incurred investigating performance complaints unless defective Generac materials and/or workmanship were the direct 

cause of the problem.

 17.  Starting batteries, fuses, light bulbs, engine fluids, and overnight freight cost for replacement part(s).

THIS WARRANTY IS IN PLACE OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, SPECIFICALLY, GENERAC POWER SYSTEMS 
MAKES NO OTHER WARRANTIES AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow limi-
tations on how long an implied warranty lasts, so the above limitation may not apply to purchaser/owner.

GENERAC POWER SYSTEMS ONLY LIABILITY SHALL BE THE REPAIR OR REPLACEMENT OF PART(S) AS STATED ABOVE. IN NO EVENT 
SHALL GENERAC POWER SYSTEMS BE LIABLE FOR ANY INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF SUCH DAMAGES ARE A 
DIRECT RESULT OF GENERAC POWER SYSTEMS, INC. NEGLIGENCE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to purchaser/ 
owner. Purchaser/owner agrees to make no claims against Generac Power Systems, Inc. based on negligence. This warranty gives purchaser/owner 
specific legal rights. Purchaser/owner also may have other rights that vary from state to state.

Generac Power Systems, Inc.  •  P.O. Box 8  •  Waukesha, WI 53187

Ph: (262) 544-4811  •  Fax: (262) 544-4851

Bulletin 0166290SBY / Printed in U.S.A.  6.04

Summary of Contents for 004812-3















































































































Reviews: