Generac Portable Products 1450-0, Owner'S Manual

Page: 5 / 20

Generac Portable Products 2,400 PSI High Pressure Washer
5
WARNING!
Read entire owner’s manual
before you attempt to assemble or operate your
new pressure washer.
REMOVE PRESSURE
WASHER FROM CARTON
• Remove the handle, high pressure hose, and parts
box included with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.
CARTON CONTENTS
Items in the carton include:
•
Main Unit
• Handle
• High Pressure Hose
• Parts Box containing the following:
•
Bag containing 4 Multi–Colored Nozzles
• Safety Goggles
• Nozzle Cleaning Kit
• Nozzle Extension with Quick–Connect Fitting
• Oil Bottle
• O–Ring Maintenance Kit
• Owner’s & Engine Manual
• Parts Bag (hardware to attach handle and
turbo nozzle)
• Spray Gun
• Extension with Turbo Nozzle
If any of the above parts are missing or damaged, call
the pressure washer helpline at 1–800–270–1408.
PREPARE PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged,
call the pressure washer helpline at 1–800–270–1408 .
Perform these tasks to prepare unit:
• Attach the handle to the main unit.
• Add oil to the engine.
• Add fuel to the fuel tank.
• Connect the high pressure hose to the spray gun
and the pump.
• Connect the water supply to the pump.
Attach Handle to Pressure Washer
To attach handle to the pressure washer:
• Slowly tip the pressure washer forward and let it
gently rest on the front bumper, as shown in
Figure 1.
• Align the holes on the handle with the holes on the
base.
• Insert the carriage bolts provided to hold the handle
in place.
• Secure handle to the pressure washer using the four
provided flange nuts.
• Slowly tip the pressure washer back in place and
insert the multi–colored nozzles in the spaces
provided in the handle.
Figure 1 — Attach Handle to Pressure Washer