Generac Portable Products 2,400 PSI High Pressure Washer
10
NOTE:
For a more gentle rinse, select white 40°
nozzle. To scour the surface, select yellow 15° or red
0° nozzle. To apply chemical, select black nozzle.
Pull back on the collar, insert the new nozzle and
release the collar. Pull on the nozzle to make sure it
is securely in place.
For most effective cleaning, keep the spray nozzle
between 8 to 24 inches away from the cleaning
surface. If you get the spray nozzle too close, you
may damage the cleaning surface.
How to Use the Turbo Nozzle
The turbo nozzle rotates the high pressure stream in a
rapid circular pattern. The high pressure spray is most
effective when the tip of the nozzle extension is held
between 8 to 24 inches from the surface being
cleaned.
Always start the turbo nozzle at a distance, gradually
getting closer to the surface until you get the cleaning
force you want.
CAUTION!
The turbo nozzle produces an
extremely high pressure spray which is capable
of removing paint and cutting holes through
surfaces if held too close. Always make sure
the surface you will clean will not be damaged
by the high pressure spray by testing in a
hidden area.
NOTE
: You cannot apply detergent with the turbo
nozzle.
Cleaning and Applying Chemical
WARNING!
You must attach all hoses before
you start the engine. Starting the engine without
all the hoses connected and without the water
turned ON will damage the pump.
IMPORTANT: Use soaps designed specifically for
pressure washers.
Household detergents could
damage the pump.
To apply detergent, follow these steps:
Review the use of the quick-connect nozzles.
Prepare the detergent solution as required by the
manufacturer.
Hang the detergent solution container on the hook at
the rear of the pressure washer.
Place the small filter of the chemical injection tube
tube into the detergent container.
CAUTION!
Keep the chemical injection tube
from coming in contact with the hot muffler. This
will damage the chemical injection tube. When
inserting the filter into a chemical bottle, route
the tube so as to keep it from inadvertently
contacting the hot muffler.
Make sure the black nozzle is installed on the
nozzle extension.
NOTE:
Detergent cannot be applied with the high
pressure nozzles (White, Yellow, or Red).
Make sure the garden hose is connected to the
water inlet. Check that high pressure hose is
connected to spray gun and pump, then start
engine.
Apply the detergent to a dry surface, starting at
lower portion of area to be washed and work
upward, using long, even, overlapping strokes.
Do Not
allow the detergent to dry on to prevent
streaking.
Allow the detergent to soak between 35 minutes
before washing and rinsing. Reapply detergent as
needed to prevent surface from drying.
