Generac Portable Products 2,500 PSI High Pressure Washer
5
Read entire owner’s manual before you attempt to
assemble or operate your new pressure washer.
REMOVE PRESSURE
WASHER FROM
CARTON
• Remove the handle, hose reel box and parts box
included with pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down flat, then
remove all packing material.
• Roll pressure washer out of carton.
Carton Contents
Items in the carton include:
•
Main Unit
•
Handle
•
Hose Reel box containing:
•
Hose Reel
•
Parts bag containing clamps, hose clip, handle,
hose reel mounting hardware
•
Parts box containing:
•
Bag with 4 multi–colored nozzles
•
Safety goggles
•
High pressure hose
•
Nozzle cleaning kit
•
Nozzle extension with Quick–Connect fitting
•
Engine oil
•
O–Ring maintenance kit
•
Owner’s manual
•
Engine manual
•
Handle hardware and detergent hose clip
•
Spray gun
•
Battery charger
If any of the above parts are missing or damaged, call the
pressure washer helpline at 1–800–270–1408.
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helpline at 1-800-270-1408.
To prepare your pressure washer for operation, you
will need to perform these tasks:
• Carefully attach the handle to the unit.
• Attach RED battery wire to battery.
• Assemble hose reel to handle.
• Attach detergent hose clip to handle.
• Add oil to the engine crankcase.
• Add fuel to the fuel tank.
• Connect the high pressure hose to the spray gun and the
pump.
• Connect the water supply to the pump.
Attach Handle to Pressure Washer
Carefully attach handle to unit as follows:
• Slowly tip the pressure washer forward and let it gently
rest on its front bumper, as shown in Figure 1.
• Slowly insert the handle through the holes in the base,
being careful to avoid touching the wires and other
electrical components.
• Align the holes on the handle with the holes on the base.
• Insert the carriage bolts to hold the handle in place.
Figure 1 — Attach Handle to Pressure Washer
Summary of Contents for 1443-0
Page 18: ...Generac Portable Products 2 500 PSI High Pressure Washer 18 NOTES...
Page 19: ...Generac Portable Products 2 500 PSI High Pressure Washer 19 SCHEMATIC AND WIRING DIAGRAM...
Page 20: ...Generac Portable Products 2 500 PSI High Pressure Washer 20 EXPLODED VIEW UNIT...
Page 22: ...Generac Portable Products 2 500 PSI High Pressure Washer 22 EXPLODED VIEW PUMP...
