English 5
a 3/8 in UNC threaded hole compatible with a
standard microphone stand. The rear has two M6
x 10 mm threaded inserts for wall or ceiling mount
brackets. Genelec offers a wide variety of mounting
accessories. Please consult Genelec web site or
your nearest Genelec dealer.
Maintenance
No user serviceable parts are inside the monitor.
Maintenance and repair must only be undertaken
by qualified service personnel.
Safety Considerations
The 8320A and 8330A have been designed in
accordance with international safety standards.
The following warnings and cautions must be
observed to ensure safe operation and to maintain
the monitor under safe operating conditions:
• Servicing must only be performed by qualified
service personnel. The monitor must not be
opened.
• Do not use the monitor with an unearthed
mains cable or an unearthed mains connection.
• Do not expose the monitor to water or
moisture. Do not place any objects filled with
liquid, such as vases, on the monitor or near it.
• This monitor is capable of producing sound
pressure levels in excess of 85 dB, which may
cause permanent hearing damage.
• Free flow of air behind the monitor is necessary
to maintain sufficient cooling. Do not obstruct
airflow around the monitor.
• The device is not completely disconnected
from the AC mains service unless the mains
power cord is detached from the device or the
mains outlet.
Guarantee
This product is guaranteed for a period of two
years against faults in materials or workmanship.
Refer to supplier for full sales and guarantee terms.
Compliance to FCC Rules
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help
Modifications not expressly approved by the
manufacturer could void the user’s authority to operate
the equipment under FCC rules.
