USER MANUAL
GWR Router Series
83
Figure 72 - Network configuration page for GWR Router
•
Click
WAN Settings
Tab to configure parameters necessary for GSM/UMTS connection. All
parameters necessary for connection configuration should be required from mobile operator.
•
Check the status of GSM/UMTS connection (
WAN Settings
Tab). If disconnected please click
Connect
button.
•
Click
VPN Settings
>
IPSEC
to configure IPSEC tunnel parameters. Click
Add New Tunnel
button to
create new IPSec tunnel. Tunnel parameters are:
•
Add New Tunnel
-
Tunnel Name: test
-
Enable: true
•
IPSec Setup
-
Keying Mode: IKE with Preshared key
-
Phase 1 DH group: Group 2
-
Phase 1 Encryption: 3DES
-
Phase 1 Authentication: SHA
-
Phase 1 SA Life Time: 28800
-
Perfect Forward Secrecy: true
-
Phase 2 DH group: Group 2
-
Phase 2 Encryption: 3DES
-
Phase 2 Authentication: SHA1
-
Phase 2 SA Life Time: 3600
-
Preshared Key: 1234567890
•
Local Group Setup
-
Local Security Gateway Type: SIM card
-
IP Address From: SIM 1 (WAN connection is established over SIM 1)
-
Local ID Type: IP Address
-
Local Security Group Type: Subnet
-
IP Address: 192.168.10.0
-
Subnet Mask: 255.255.255.0
•
Remote Group Setup
-
Remote Security Gateway Type: IP Only
-
IP Address: 150.160.170.1
www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
