USER MANUAL
GWR Router Series
25
WAN Settings(advanced)
Label
Description
Enable
This field specifies if Advanced WAN settings is enabled at the GWR Router.
Accept Local IP
Address
With this option, pppd will accept the peer's idea of our local IP address, even if
the local IP address was specified in an option.
Accept Remote IP
Address
With this option, pppd will accept the peer's idea of its (remote) IP address, even
if the remote IP address was specified in an option
.
Idle time before
disconnect ( sec)
Specifies that pppd should disconnect if the link is idle for n seconds. The link is
idle when no data packets are being sent or received.
Refuse PAP
With this option, pppd will not agree to authenticate itself to the peer using PAP.
Require PAP
Require the peer to authenticate using PAP (Password Authentication Protocol)
authentication.
Refuse CHAP
With this option, pppd will not agree to authenticate itself to the peer using
CHAP.
Require CHAP
Require the peer to authenticate using CHAP (Challenge Handshake
Authentication Protocol) authentication.
Max. CHAP challenge
transmissions
Set the maximum number of CHAP challenge transmissions to n (default 10).
CHAP restart interval
sec
Set the CHAP restart interval (retransmission timeout for challenges) to n
seconds (default 3).
Refuse MS-CHAP
With this option, pppd will not agree to authenticate itself to the peer using MS-
CHAP.
Refuse MS-CHAPv2
With this option, pppd will not agree to authenticate itself to the peer using MS-
CHAPv2.
Refuse EAP
With this option, pppd will not agree to authenticate itself to the peer using EAP.
Connection debugging
Enables connection debugging facilities. If this option is selected, pppd will log
the contents of all control packets sent or received in a readable form.
Maximum Transmit
Unit ( bytes)
Set the MTU (Maximum Transmit Unit) value to n. Unless the peer requests a
smaller value via MRU negotiation, pppd will request that the kernel networking
code send data packets of no more than n bytes through the PPP network
interface.
Maximum Receive
Unit (bytes)
Set the MRU (Maximum Receive Unit) value to n. Pppd will ask the peer to send
packets of no more than n bytes. The value of n must be between 128 and 16384;
the default is 1500.
VJ-Compression
Disable Van Jacobson style TCP/IP header compression in both directions.
VJ-Connection-ID
Compression
Disable the connection-ID compression option in Van Jacobson style TCP/IP
header compression. With this option, pppd will not omit the connection-ID byte
from Van Jacobson compressed TCP/IP headers.
Protocol Field
Compression
Disable protocol field compression negotiation in both directions.
Address/Control
Compression
Disable Address/Control compression in both directions.
Predictor-1
Compression
Disable or enable accept or agree to Predictor-1 compression.
BSD Compression
Disable
or enable BSD
-Compress compression.
www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
