RXC-3080
Hardware Installation and User Guide
9000-0000-042 Revision 06
13 of 45
Genave Electronics
Installing
Mounting the RXC-3080
The enclosure is made of polycarbonate and has a NEMA 4X rating when shipped from the
factory. Four mounting inserts are provided on the back of the enclosure for mounting the box
to a wall. The inserts are threaded for metric M5 bolts. Mounting feet are available for the
enclosure (Genave P/N 7050-0000-019). The feet allow front-on mounting of the enclosure to
a wall and can be mounted vertically, 45 degrees, or horizontally. If you are mounting the
equipment to a pole it is important to keep the enclosure flat and not allow the box to twist.
The door gasket will not completely seal if there is a twist to the box. If you need design
assistance please contact Genave®. We have several options available for pole mounting.
When making connections to the enclosure, do not drill through the top or sides of the box.
Make all connections through the bottom of the enclosure to maintain at least a
NEMA 3R
rating.
The internal equipment is mounted to a metal backplane. The backplane is secured to the
enclosure with screws that are specifically designed for plastics. Do not use any other type of
screw to secure the backplane to the enclosure, as it will damage the standoff.
Attachment To A Pole
Genave offers a pole mounting kit (HDW-5051) for the RXC-3080. The kit can be used to attach the
RXC-3080 to a wood pole with screws or lags, customer supplied, or it can be attached to a steel pole
with the optional stainless steel banding.
