RXC-3080
Hardware Installation and User Guide
9000-0000-042 Revision 06
22 of 45
Genave Electronics
Outputs
Relay Characteristics
The RXC-3080 has 5 high power relays available for use. Each relay can handle 240VAC at 7 Amps.
Each relay's outputs are directly connected to a 3 position header (J6 to J10) that can accept wires up to
12 AWG diameter.
Each output connector is a 1FormC output (A single switch with normally open, common and normally
closed connections).
The relay is supplied on one side of its coil with +12VDC and the other side of the coil controlled by a
transistor that, when active, pulls the relay's coil to ground and activates the relay.
The transistors that control the relays are also connected to the output header along with 3
uncommitted transistors. (see below).
Relay 5
Relay 4
Relay 3
Relay 2
Relay 1
R
el
ay
5
R
el
ay
4
R
el
ay
3
R
el
ay
2
R
el
ay
1
