LR900 Node
Hardware Installation and User Guide
9000-0000-126 Revision 01
12 of 21
Genave Electronics
13)
a.
(pg. 1) Pressing “Enter” will send a transmission to the
unit identified in screen 2. When the remote LR900 replies,
the word “RECEIVING” and the antenna icon will flash on
the screen.
b. (screen 2) Enter the Unit ID of the remote unit to
contact during the range test.
c. Note on range test. Due to the self-repairing nature of
the LR900 radio network, the range test signals may pass
through other nodes to reach the intended destinations.
14)
a.
Pressing the “Enter” button sends a signal to all units
asking them to respond. Each response will appear on the
screen with its Unit ID and the strength of the signal when
it was received at the remote.
15)
a. (screen 1) RF beacon interval the LR900
transmits it’s
status when on external power.
b.
(screen 2) RF beacon interval the LR900 transmits it’s
status on the network port.
16) Menu Lock
a. A five digit alpha-numeric code to limit access to the
adjustment menus. Note the password for future reference.
17)
a. A five digit alpha-numeric, security key used to encrypt
the radio communications.