RP1300 User‟s Manual
47
Reading Bar Codes
The RP1300 ships with an internal imager to read and enter bar code data.
To read a bar code
1.
Press Power key to turn on the RP1300.
2.
Point the scanner window at the bar code label, and hold the RP1300 steady a few inches from the
label.
3.
In File Explorer, Flash Disk > Scanner > ScanDemo > execute G2W_Scanner
4.
Press the Scan button. The laser pointer and illumination beam and frame appear.
5.
Use the laser pointer as a guide and aim toward the middle of the bar code. Make sure that the
illumination frame covers the bar code you are trying to decode.
When the RP1300 successfully reads a bar code label, you hear a high beep.
6.
Release the Scan button.