7
2)
Installing Battery
iCAM M300 uses a Lithium-ion rechargeable battery
(Standard 1860mAh, Middle 2860mAh, Extended 4000mAh).
Install the provided battery before starting to charge the device.
A.
Installing the Battery
(1)
Insert the battery, top first, into the battery compartment in the back of the device.
(2)
Press the battery down into the battery compartment.
(3)
Lock the Battery Release Latch.
** When removing the battery cover, be careful not to damage your fingernail.
B.
Removing the Battery
(1)
Open the Battery Release Latch.
(2)
Pull the battery up into the battery compartment.
3)
Charging the Battery
Before using the iCAM M300 device for the first time, charge the main battery until the
amber Charging/Battery Status LED remains lit (see below picture for charge status
indications).
To charge the device, use a cable or a cradle with the appropriate power supply.
A.
To charge with the cradle
(1)
Place the device on the cradle as illustrated below. Connect the power adapter with the cradle,
and plug it into a power outlet.
-
Connect the charging accessory to the appropriate power source.
-
Insert the device into a cradle or attach to a cable.
-
The device begins charging.
-
The Charging/Battery Status LED red while charging then turns LED green when fully charged.
** You can also take out the battery from the device and charge it separately on a cradle.
