computers. Microsoft Internet Explorer 4.0 or higher or Netscape 4.0 or higher must
be used for the web-based configuration tool.
Factory Default Settings
Dell pre-configures the Router with the following settings:
NOTE:
If you lose track of the device settings, you can reset the router by pushing the
reset button to restore these settings back to your router.
Setting
Default
User Name
admin
Password admin
Device Name
my router
IP Address
192.168.2.1
Subnet Mask
255.255.255.0
10 Mbps Ethernet WAN IP
<obtain from ISP via DHCP>
WAN DHCP Client
Enabled
ESSID (wireless network name)
wireless
Channel 6
Encryption No
Encryption
DHCP Server
Enabled
NAT Routing
Enabled
NOTE:
Your Wireless Broadband Router came with factory default settings that should
work for the majority of the network usage scenarios. However, there are cases
where your network environment may require a different router configuration.
Setup Wizard
Introduction
