P-780 User’s Guide v1.2
February 7, 2005
Gemtek Systems
Page 32 of 60
DHCP Relay
To route DHCP through the external server, enable the
DHCP
Relay
service.
Figure 27 – DHCP Relay settings
Server IP
: enter the IP address of the external DHCP server.
Change status or leave in the default state if no editing is necessary and click the
Save
button.
Figure 28 –Apply or Discard DHCP relay Settings
For each change of settings, the P-780 needs to be restarted to apply all settings changes when
clicking
Apply
Changes
. Request for reboot server appears:
Figure 29 – Reboot information
Reboot
– Click the button to restart the server and apply the changes.
If there is no other setting needed to be modified, click the
Reboot
button for
applying all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click
Reboot
button to restart and apply all settings together.
