P-780 User’s Guide v1.2
February 7, 2005
Gemtek Systems
Page 23 of 60
This chapter contains web management reference information.
The
web
management
main menu consists of the following sub menus:
Status
– device status showing
Network
– device settings affecting networking
Wireless
– device settings related to the wireless part of the P-780
System
– device system settings directly applicable to the P-780
Exit
– click exit and leave the web management then close your web-browser window.
Web Interface
The main
web
management
menu is displayed at the top of the page after successfully logging into
the system (see the figure below). From this menu all essential configuration pages are accessed.
Figure 11 – Main Configuration Management Menu
The
web
management
menu has the following structure:
Status
Device Status
– show the status related with the whole device
Wireless Status
– show the status of the two radios
Network
Interface
– TCP/IP settings of P-780 LAN (Bridge) port
RADIUS Server
– specify the settings of RADIUS server which is used by 802.1x or WPA
DHCP Settings
– specify the settings of DHCP server or DHCP relay service
Wireless
Basic
– specify the basic settings related with wireless part
Advance
– specify the settings of multiple BSSID or Bridge
WEP
– specify the WEP settings related with static WEP encryption
MAC ACL
– MAC ACL settings for P-780
System
Security
–
set access permission to your P-780
SNMP
–
SNMP service
Telnet
–
Telnet/SSH service
Configuration
– system configuration utilities, including Backup/Upload configuration
Reset –
reboot device and restore systems to factory default
Upgrade
– Upgrade the firmware remotely
In the following sections, short references for all menu items are presented.
Chapter 4 – Reference Manual
