8.
Installing Aux Device for Impact Lockout
If the impact lockout feature is available on the Sapphire V2S, an Aux device (such as an
alarm or light) can be fitted to activate upon impact. A threshold is set on the module so
impacts above this threshold will lock out the module and activate the device.
The default lockout threshold is 5.5 G
An override code is required to change the threshold on the module.
Alternatively, it can be changed remotely using the interface.
Voltage input range for strobe alarm is 12-48V. DO NOT exceed 48V.
1.
Installation Diagram – Strobe/Alarm Combo
2.
Activating the Aux Device
Installation of the device can be tested by lowering the impact threshold to 1.0 G then
triggering an impact above 1.0 G. This will lock out the device and close the Aux relay.
Be sure to change the impact threshold back to 5.5 G (unless the customer
utilizes a different value).
15
