2.
Wiring Guide
The following information describes where to connect wires found on the grey connector.
Wire Color
Purpose
Connected To
Black
Ground
Ground/Earth/Negative
Red
Power
Battery Positive/ Constant Power Source
Yellow
Ignition Sense
Key switch - accessories position
Grey
Digital Input 1
Operator presence is most common for input 1.
Operator Presence is measured by either the
deadman or seat switch.
Brown
Digital Input 2
Forward or Reverse is most common for input 2.
White
Drive Inhibit Relay COM
Internal Combustion - Male spade at the end
Connected to Position 85 of starter relay coil
Electric Vehicle - Male spade at the end
Connected to seat/dead man switch
White/Purple
OR
White/Orange
Drive Inhibit Relay NO
Internal Combustion - Male spade at the end
Connected to Position 85 of starter relay coil
Electric Vehicle - Male spade at the end
Connected to seat/dead man switch
White/Black
Aux Relay COM
Relay for impact lockout
Connected to Ground/Earth/Negative
White/Blue OR
White/Yellow
Aux Relay NO
Relay for impact lockout
Connected to Aux device Ground/Earth/Negative
10
