Gemm ARG-30, Instructions For Use Manual

Page: 54 / 122

ARP_ARG Rev03 05-2013
pag. 54
The following keys are present on the controller
0/1, ON-OFF KEY
When the appliance is OFF (0), press just once to pass to ON (1).
When the unit is on and after having activated the keypad by
pressing and holding any key for 3 sec, press just once to switch
OFF.
UP AND DOWN
KEYS
Used to increase or decrease the value that appears on the display.
With the keypad active, press and hold the UP arrow key for 3 sec
to activate the continuous timed cycle.
DEFROST KEY With the appliance ON, press and hold for 3 sec to activate defrost.
SET KEY
With the appliance ON and keypad active, press just once to
display the set point; press and hold for 3 sec to change the set
point.
LIGHT KEY
With the appliance ON and keypad active, press just once to switch
the interior light on or off.
AUX / DOUBLE HR
With the appliance ON and keypad active, press just once to active
the double HR function inside the room (TN version) .
ENERGY SAVING
With the appliance ON, press and hold for 3 sec to activate “night”
function of Energy saving
.
The following icons are present on the controller display:
OFF Only lit when the appliance is OFF, otherwise always off.
CELSIUS May be lit to show the temperature unit of measurement.
COMPRESSOR
Lit during normal refrigerating stages with compressor ON; off with
compressor OFF. Blinking during defrosting (temperature drop).
DEFROST Lit during DEFROST.
LIGHT Only lit when the cabinet interior lights are on.
FAN Only lit when the cabinet internal fans are operating (evaporator).
CONTINUOUS CYCLE Only lit when the continuous cycle is activated (timed cycle).
ALARMS
Only lit when an appliance malfunction or alarm is recorded by the
controller.