We reserve the right to modify the characteristics of the equipment supplied without notice or as part of the continued development of our products.
2
ELECTRICAL CONNECTIONS
FOR EBS RANGE OF CYLINDERS
Please Note
The Electrical “Straight Line” wiring diagram supplied with this literature is intended to assist in the
understanding of how the system works for fault finding and general assistance on the EBS cylinder, it
has no knowledge of individual peripherals fitted to the beginning or the end of the line, it does not
provide information on your chosen peripherals. Please refer to the manufacturer’s literature supplied
with each item you choose to install or please contact the Geminox-UK Technical helpline for further
assistance on + 44 (0)1372 722277.
Index
Page
2 Index
3
WRc approved documentation *
Contains important information, please read*
6
*Important notice, please read*
7
Hydraulic connections for cylinders
9
Cylinders with immersion heaters
11
Cylinders without immersion heaters
Figures
7
Fig 1 ¾” Unvented kit for EBS cylinder
7
Fig 2 ¾” Unvented kit for EBS cylinder
8
Fig 3 1” Unvented kit for EBS cylinder
8
Fig 4 1” Unvented kit for EBS cylinder
10
Fig 5 ¾” Safety zone valve
10
Fig 6 1” Safety zone valve
13
Fig 7 Requirements for EBS domestic unvented hot water cylinder
14
Fig 8 EBS cylinder sensor
15
Fig 9 Cylinder with immersion heater
16
Fig 10 Cylinder without immersion heater
17
Fig 11
Heating immersion set
18
Fig 12 Discharge pipe arrangement using Hepworth Hep vO valve
Please ensure that prior to starting any Electrical work the cylinder has been isolated from the
mains supply. Where possible, lock off and warning signs to be posted.
Only Qualified Electricians should carry out the work necessary.
