9.2 - STOP & GO ACTIVATION:
9.3 - STOP & GO DEACTIVATION:
9.4 -
:
setup#password#basic#main phone number#new
password#emergency phone number#f#
setup#password#basic#main phone number#new
password#emergency phone number#s#
setup#password#nav#main phone number#new
password#emergency phone number#
Upon reception of SMS, the system replies:
Every time ignition key is turned “ON”, the user will receive this message:
Every time ignition key is turned “OFF”, the user will receive this message:
When the SMS is received, the system replies:
By sending this command, the user will no longer receive a message every
time ignition key is turned “ON” or “OFF”.
When the SMS is received, the system replies:
The system will ignore any alarm triggered by a displacement attempt. To re-enable
the tilt sensor send the initial configuration message (see chapter 9.1).
setup ok with password= new password.
Key On GPS status; latitude; longitude; speed; hour; date.
Key Off, GPS status; latitude; longitude; speed; hour; date.
Setup ok with password= new password.
Setup ok with password= new password.
TILT SENSOR EXCLUSION
ATTENTION
The system can be configured with the “STOP & GO” feature (SMS alert
every time ignition is turned ON or OFF (see chapter 9.2, 9.3 or 15.0) and
the tilt sensor can be excluded (see chapter 9.4 and 15.0).
9.5 - VEHICLE LOCALIZATION:
loc#password#
Upon request, the system sends an SMS indicating:
System status (armed or disarmed), GPS status; latitude; longitude;
speed; hour; date.
