8.0 - ALARMS
8.1 - IGNITION DETECTION ALARM
8.2 - TILT ALARM
8.3 - POSITION ALARM
8.4 - BATTERY ALARM
This alarm is triggered if ignition key is turned “ON” while the system is armed
15.0.
The system
(
).
.
The
.
When the system is armed, attempts to lift or move the vehicle (including hauling or
wheel stealing) will trigger an alarm. To exclude this alarm see chapter 9.4 or
provides protection against displacement attempts while ignition
is OFF ex. towing
When ignition is switched back “ON”, the system compares the actual position
to the position saved when the engine was powered off.
If they differ by more than the factory set tolerance (not modifiable), the system
sends the user an alarm message
system rovides protection against battery tampering. If one of the power
supply cables is cut, the system sends an alarm message to the user (no pre-
alarm signal is triggered).
p
7.0 - PRE-ALARM AND ALARM
When the My GTRACK is armed, there is a pre-alarm and an alarm stage.
Pre-alarm is signalled by 15” of optical signals (LED and indicator lights) during
which the system can be disarmed via remote control. If the system is not
disarmed, an alarm is triggered and an alert message transmitted to the “main
number” indicating the type of alarm (ignition alarm, tilt alarm, etc.).
If no one intervenes within 5 minutes, the system sends a 2nd text message to
the emergency number (see chapter “Commands from/to a mobile phone”).
Ignition remains inhibited.
ATTENTION
Whenever an alarm message is sent, the system triggers the siren and
the turn indicators (if connected).
