Gemini GEM-RP1CAe2, Operating Manual

Page: 6 / 40

6
Z O N E S F A U L T E D
0 2 B A C K D O O R
BYPASSED B Y P A S S E D
BYPASSED
0 2 B A C K D O O R
Arming the System
1.
Check the keypad.
The green STATUS light must be on in order to arm. If the green
light is off, “ZONES FAULTED” will display in the window followed by the number and
description of each faulted zone. Note each problem zone and secure it by closing a
window, door, etc. When all zones are secure, the green STATUS light will come on
and the window will display “SYSTEM READY”.
2.
Arm the system.
Enter your code and press
J
. The green STATUS light will go off, the
red ARMED light will come on and the window will display “EXIT TIME XXX”, “PLEASE
LEAVE NOW” (where “XXX” represents the exit time remaining, in 10-second steps).
Note: If you enter a wrong code, the keypad will display “INVALID ENTRY, TRY
AGAIN”. Re-enter your code immediately.
Leave the premises.
Leave through the exit door before exit time expires.
Priority Arming
If you attempt to arm with a faulted Zone, a 3-second tone will sound at the keypad.
“ZONES NOT NORMAL” and “CAN'T ARM SYSTEM”, will display in the window,
indicating that the faulted zone(s) must be secured before the panel can be armed.
Selectively Bypassing Zones
If you cannot locate or repair the problem yourself, call for assistance. If you cannot get
immediate help, bypass the problem zone(s) from the system by pressing
B
,
then the
zone number (or vice versa).
Note:
Bypassed zones are unprotected. If armed with zones bypassed, be sure to have
the system checked as soon as possible.
E X I T T I M E 0 6 0
P L E A S E L E A V E
ZONES NOT
NORMAL
CAN’T ARM SYSTEM
Z O N E S F A U L T E D
SYSTEM READY
0 2 B A C K D O O R
BYPASSED
B Y P A S S E D
BYPASSED
0 2 B A C K D O O R
S E T T I N G T H E A L A R M ( A R M I N G ) W H E N L E A V I N G