IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT:
1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THISE EQUIPMENT TO YOUR DEALER.
Congratulations on purchasing the
Gemini CDMP-2600 CD Player
.
This state of the art
Professional CD Player
is backed by a 1 year
warranty*. Prior to use, we suggest that you carefully read all the instructions.
- Audio CD & CD-R compatible
- Extra Large jog wheel
- Anti-shock using RAM buffer memory
- 2 Selectable Jog modes Pitch Bend/Search
- Instant-start & cue with preview
- Single & continuous play modes
- Seamless loop with reloop
- Pitch bend via jog wheel or b/- 24%
- Three mode time selection
- Frame accurate search
- Large blue backlit LCD display
- Variable pitch control with three se/- 8,16 & 24%
Laser Diode Properties
Material: Ga - Al - As
Wavelength: 755 - 815 nm (25° C)
Laser Output: Continuous Wave, max. 0.5 mW
1. Do not use this CD player at temperatures below
41°F/5°C
or
higher than
95°F/35°C
.
2. The apparatus should not be exposed to dripping or splashing,
and no objects filled with liquids such as vases should be
placed on the apparatus.
3. Place the unit in a clean and dry location.
4. Do not place the unit in an unstable location.
5. When disconnecting the power cord from the AC outlet,
always grasp it by the plug. Never pull the power cord.
6. To prevent electric shock, do not remove the cover or the bottom screws.
7. There are
NO USER SERVICEABLE PARTS INSIDE
. Please
refer to a qualified technician.
8. Do not use chemical solvents to clean the unit.
9. Keep the laser pickup clean by keeping the tray closed.
10. Keep this manual in a safe place for future reference.
INTRODUCTION:
CDMP-2600
4
FEATURES:
SAFETY SPECIFICATIONS:
PRECAUTIONS:
CONNECTIONS:
1
MAIN POWER RECEPTACLE:
This is a Standard 3-prong IEC power
connector. Connect the detachable linecord (included in the box with
your
CDMP-2600
) to the power receptacle, and plug the other end of
the linecord into an
AC
outlet.
The
CDMP-2600
has a universal power supply that can accept any
AC
voltage from
100 VAC to 240 VAC.
No need for voltage select
switches. It will work virtually anywhere in the world. It is less suscept-
able to voltage sags or spikes than conventional power supplies, pro-
viding greater electro magnetic isolation and better protection against
AC
line noise
2
LINE OUTPUT JACKS
Plug one end of the included
RCA
cable into
LINE OUTPUT JACKS
on the rear panel. Plug the other end of the
RCA
connectors into any available line input jacks on your mixer.
If you are connecting the
CDMP-2600
through a reciever, you can
plug the
RCA
connectors into the
CD
or
AUX INPUT JACKS
on your
reciever. If there are no
CD
or
AUX INPUTS
use any line level
(not phono) inputs.
CONTROL CABLES
Plug the
CONTROL CABLES
to each side of the
CDMP-2600
be careful when plugging in these cables, never force
the cable into its socket, making sure that the
DIN
connector at the
end of the cable properly aligns with the drawing on the back of
the
CDMP-2600
.
3
4
FUNCTIONS:
POWER:
Once you have connected all your cables and made sure
that the
VOLTAGE SELECTION SWITCH
is set correctly, you can turn
the
CDMP-2600
on by pressing the
POWER
button, pressing the
CDMP-2600’s POWER
button a second time will turn off the unit.
DISC TRAY:
The
DISC TRAY
is where the
CD
is held during loading,
unloading and playback, and holds both 12 cm and 8cm CD’s.(
DO
NOT FORCE THE CD TRAY TO CLOSE EXCESSIVE FORCE WILL DAMAGE
THE CD MECHANISM, USE THE OPEN AND CLOSE BUTTONS
)
EJECT BUTTON:
Pressing the
EJECT BUTTON
will open or close the
DISC TRAY,
unless the
CDMP-2600
is in play mode, then you must
first stop the side you which to eject.
NOTE: To eject a CD you must be in CD mode, simply press the
USB/CD button and then press EJECT.
JOG WHEEL :
In
SEARCH MODE
the
JOG WHEEL
can be used to
search forward or backwards in the music track, as well as for fine
adjustments to a
CUE
point in
PAUSE
mode. In
PITCH BEND
mode the
JOG WHEEL
will function the same as the
PITCH BEND
allowing you
to speed up (
FORWARD
) or slow down (
REWIND
) the music clockwise
being (
FORWARD
) and counter clockwise being (
REWIND
).
JOG MODE BUTTON:
When the
JOG MODE BUTTON
is illuminated
it indicates the the
JOG WHEEL
is in
SEARCH MODE
, and when not il-
luminated it indicates that the
JOG WHEEL
is in
PITCH BEND MODE
.
DISPLAY:
The
DISPLAY
shows the track number, pitch value, pitch
bend, single, continue (for continuous play), play/pause modes, fast
forward/reverse modes, loop mode, reloop mode,
PGM
, repeat
modes, the playback display bar, and three different time displays.
These times displays are
TIME ELAPSED
on the track,
TIME REMAIN-
ING
on the disc and and
TIME REMAINING
on the track. Time is
measured in minutes, seconds and frames.
TIME
: The
TIME BUTTON
switches the time display between three
available sources, these three are
TIME ELAPSED
on the track,
TIME
REMAINING
on the disc and and
TIME REMAINING
on the track.
TIME ELAPSED
indicates how much time has currently gone by since
the play button was pressed,
TIME REMAINING ON DISC
will count
down the time remaining on the entire disc and
TIME REMAINING
ON TRACK
counts down the time that is left before the end of the
track.
SINGLE:
Pressing the
SINGLE
button engages
SINGLE
mode, in this
mode the
CDMP-2600
will play one song and then stop. Pressing the
SINGLE
button again will then activate
CONTINUOUS
mode causing
the unit to play continuously (after the last track, the unit will return to
the first track of the disc and continue to play).
5
6
7
8
9
10
11
