Gemini CDM-3610 Operation Manual Download Page 6

Page: 6 / 25

causes the operation to change from PLAY to PAUSE or
from PAUSE back to PLAY. The PLAY/PAUSE BUTTON
remains lit when in PLAY mode, while it blinks in PAUSE
mode.

CUE: To set a CUE point, press the PLAY/PAUSE BUTTON
while a file is playing and use the JOG WHEEL to locate
a  desired  CUE  point.  Pressing  the  PLAY/PAUSE  BUT-
TON again will set a CUE point. While the unit is playing
and after the cue point has been programmed, pressing
CUE will cause the CD player to enter the PAUSE mode
(PLAY/PAUSE  BUTTON  blinks)  at  the  programmed  cue
point  (the  CUE  LED  is  lit).  Holding  down  the  CUE  but-
ton changes the function to preview, and allows you to
stutter start or play from the programmed CUE POINT.
Releasing the CUE button will return the CD to the preset
CUE point.

TRACK SELECTION ROTARY: The TRACK SELECTION
ROTARY allows you to select the next or previous track
by either turning it clockwise to go forward or counter-
clockwise to go back. Select the track desired by press-
ing the TRACK SELECTION ROTARY.
NOTE: ONCE YOU HAVE SKIPPED TO ANOTHER TRACK,
YOU MAY NOT GO BACK TO YOUR PROGRAMMED CUE
POINT. YOU MUST BEGIN YOUR CUE SELECTION OVER
AGAIN, THE CUE WILL BE PRESET TO THE BEGINNING
OF THE NEWLY SELECTED TRACK.

BRAKE: To engage the BRAKE function, press the
BRAKE button, then press the PAUSE button to perform
the brake effect. To restart the song, press the PAUSE
button.

REVERSE: When the REVERSE button is pressed, the file
that is currently playing begins to play in reverse mode.

SEARCH: The SEARCH feature allows the operator to go
forward or backwards in time on the current track as-
signed to that channel.

CHANNEL  INPUT  SELECTOR:  The  CHANNEL  INPUT
SELECTOR  switches  allow  you  to  choose  which  input
will  be  controlled  by  that  channels  corresponding  vol-
ume FADER. For example CHANNEL (1) INPUT SELEC-
TOR allows you to choose between line (1) (That sides
internal  CD  player),  line  (2)  which  is  line  input  RCA  (1)
and  or  PHONO  (1)  (if  the  CONVERTIBLE  LINE  SWITCH
is switched to PHONO) see above. The same applies for
channel 2.

CHANNEL ROTARY GAIN: The CHANNEL ROTARY GAIN
allows you to boost the signal of each individual channel
depending on how low or high its input level is.

3-BAND EQUALIZER: The 3-BAND EQUALIZER adjusts
the tone of each CHANNEL by giving you a choice 3 fre-
quencies (BANDS) to adjust, from LOW, MIDRANGE (MID)
and HIGH’s, you can use the adjustment knobs to higher
or lower the 3 separate frequencies till the sound of the
music program is appropriate for your listening environ-
ment.

CHANNEL VOLUME FADER: After you have chosen which
input you will use with the INPUT SELECTOR the corre-
sponding CHANNEL FADER will allow you to adjust the
volume for that particular CHANNEL.

CHANNEL CUE SELECTOR: The CHANNEL CUE SELEC-
TOR allows you to choose which channel you wish to
monitor in your headphones, to the left is CHANNEL (1) to
the right is CHANNEL (2).

CUE VOLUME ROTARY KNOB: The CUE VOLUME RO-
TARY KNOB adjusts your HEADPHONE MONITOR OUT-
PUT’S volume.

MICROPHONE VOLUME ROTARY KNOB: Allows you to
adjust the volume of the microphone signal.

MASTER OUTPUT ROTARY KNOB: The MASTER OUTPUT
rotary knob adjusts the volume of the MAIN MASTER out-
put.

VU METER: The CDM-3610 has a stereo VU METER that
allows you to monitor the decibel levels of the LEFT and
RIGHT MASTER output.

FADER START BUTTON: The Fader Start function allows
you to start CD playback simply by moving the CROSS-
FADER from side to side.

A.  Cue  up  the  CD  player  you  wish  to  start  using  the
Fader Start function
B. Move the CROSSFADER all the way to the opposite
side of the CD you have just cued.
C. Press the FADER START SELECTOR button so that
the button becomes illuminated.
D.  At  the  point  in  which  you  wish  to  start  the  audio
from the cued CD, simply move the CROSSFADER in
the direction of the cued CD player, and playback will
begin.
E. When the CROSSFADER is moved all the way to the
opposite side of the currently playing disc, the unit will
stop  playing  that  disc  and  return  to  the  beginning  of
the track or the set cue CDM-3610 point.

CROSS  FADER:  The  CROSS  FADER  allows  you  to  mix
evenly from one source to another. The CROSS FADER on
the  CDM-3610  is  also  removable  and  if  the  need  arises
can  be  replaced.  The  RG-45  (RAILGLIDE™)  DUAL-RAIL
CROSS  FADER,  which  has  internal  dual  stainless  steel
rails that allow the slider to ride smoothly and accurately

CDM-3610

MIXER SECTION: