Designed
and
manufactured
by
GEMINI
TECHNOLOGIES
srl
‐
Via
L.
Galvani,
12
–
21020
Bodio
Lomnago
(VA)
–
Italy
Tel.
+39
0332
943211
–
Fax
+39
0332
948080
–
www.gemini
‐
alarm.com
ISO
9001
CERTIFIED
COMPANY
Rev.00
05/2017
2/9
Ø 18-20mm
Sensors and adapters can be spray painted before assembly to match the color of the vehicle (optional). To spray paint proceed as follows:
1.
Use isopropyl alcohol to clean the sensors and the adapters and let dry. Avoid touching the cleaned surfaces.
2.
Insert the selected adapters in the supplied cardboard template:
Inner adapters => fully insert into the cardboard template slots from the top side.
Outer adapters => press halfway down the slots, up to the side tabs, from the top side.
3.
The sensors must be inserted in the slots from underneath the cardboard. For a perfect spray-paint finish, we recommend turning down the black silicone seal
around the sensor head before inserting the sensor into the slots (paint might not adhere to the silicone).
4.
Fold the cardbox template into a box. Spray paint the sensors and the adapters and let dry thoroughly before assembling.
NB: Too much spray paint can impair the sensors performance.
4x
sensors
1x
acoustic warning
buzzer for programming
complete with wiring
1x
resin filled control unit
complete with wiring
6x
cable clips
12x
zip-ties
4x
10° angled
external adapters
4x
standard external
adapters
4x
10°angled inner
adapters
4x
standard inner
adapters
8x
adhesive pads
1x
ON/OFF switch
with LED + connector
3.0 - KIT CONTENTS
4.0 - TOOLS
5.0 - SPRAY PAINT - SENSOR HEADS AND ADAPTERS
