Gemalto SafeNet Luna Network HSM 7.0 Installation Manual Download Page 32

Page: 32 / 52

SafeNet Luna HSM Client Software

Installation

This chapter describes how to install the SafeNet Luna HSM Client software. After installing the hardware, you need to
install the SafeNet Luna Client software before you can begin configuring your SafeNet Luna HSM(s).

You can install the client for all SafeNet General Purpose HSMs, or for a specific type (Network or PCIe). Install the
client as follows:

•

For SafeNet Luna Network HSM, install the SafeNet Luna Client on any computer that must connect to the
appliance as a client.

•

For SafeNet Luna PCIe HSM, install the SafeNet Luna Client on the workstation into which the SafeNet Luna PCIe
HSM is installed.

•

For SafeNet Luna USB HSM, install the SafeNet Luna Client on the workstation to which the SafeNet Luna USB
HSM is connected.

•

Install the SafeNet Luna Client on any computer that is to have a SafeNet Remote PED connected.

Choose the instructions for your operating system:

•

For Linux, see

"Linux SafeNet Luna HSM Client Software Installation" on the next page

•

For Windows, see

"Windows SafeNet Luna HSM Client Installation" on page 40

The following supplemental topics

also apply to Windows:

–

"Scripted/Unattended Windows Installation/Uninstallation" on page 49

Note:

Not all operating systems are supported for each SafeNet Luna HSM type. Refer to the

Customer Release Notes (see

"Customer Release Notes" on page 7

) for the most current

information on supported platforms.

SafeNet Luna Network HSM Installation Guide

Summary of Contents for SafeNet Luna Network HSM 7.0





















































Search results

Summary of Contents for SafeNet Luna Network HSM 7.0

Reviews:

Related manuals for SafeNet Luna Network HSM 7.0

Brands by name

Popular brands

Gemalto SafeNet Luna Network HSM 7.0, Installation Manual

Search results

Summary of Contents for SafeNet Luna Network HSM 7.0

Reviews:

Related manuals for SafeNet Luna Network HSM 7.0

Brands by name

Popular brands