Intelligent Document Reader AT10Ki User Guide
Installing the Reader (Networked mode)
Page 28 of 41
To test the reader:
You can use one of the Gemalto test programs to check the reading function. Connect to the reader you
want to test and then click the document capture icon.
1.
Select
the test card (DS-00031 or DS-00034) supplied with the reader.
2.
Place the test card face down on the document window, aligned with the left guide, with the test
card instructions facing up.
3.
Push
the
card to the back of the document window until it stops.
Note:
Do not move the document during the scanning process.
4.
Observe
the lights during the scanning procedure.
The yellow LEDS change from landing lights sequence to progress bar sequence while the
reader scans and processes the data. Ensure that the document is held still whilst reading.
The OK light (green tick) turns on, indicating a successful read.
The yellow LEDs return to landing lights sequence, indicating that the reader is ready to
scan another document.
The data from the test card is sent to the test application and the results displayed on the screen.