Rev. 00 03/19
OptiFlex Pro B
Fault clearance
47
Fault clearance
Error diagnosis of the software
General information
The correct function of the Gun control unit is constantly monitored. If the
equipment software determines a fault, an error message is indicated with
a help code. Following is monitored:
– High voltage technology
– Pneumatic system
– Power supply
Help codes
The error diagnosis codes (help codes) are shown in red on the
A5
display.
The help codes are stored in an error list in the order of their appearance.
Each error in the list must be individually acknowledged with the keys
T10
or
T11
.
The errors are displayed in the order of their appearance. The
T10
and
T11
keys cannot be used for other functions, as long as an error code is
still shown.
Here is a list of all possible help codes for this Gun control unit:
Code
Description
Criteria
Remedy
Pneumatics:
H05
PowerClean valve
– PowerClean valve not
connected
– Valve defective
– Connection cable
defective
– Mainboard defective
connect or replace
Contact a Gema service
center
Summary of Contents for OptiFlex Pro B
